Manufacturer: Intergrain
Model: Dimension 4
For Preparing Timber
A timber stabilising pre-treatment which prolongs the life of DWD and other compatible finishes. It protects timber from staining, sun, water and mould damage during the construction period and prior to coating. Dimension 4 stabilises timber by reducing water absorption, cupping, splitting, checking, fading and staining.
IMPORTANT: In order to provide a foundation for long term timber protection Dimension 4 must be overcoated with either DWD or other compatible finishes within three months of application.
Where To Use
On all exterior timber including bare, clean, new or old, sawn or dressed timber cladding, weatherboards, window frames, joists, bearers, decking, pergolas, log homes and structural timbers. Also used for back priming timber weatherboards and interior lining for wet areas.
Preparation
Clean all timber with Reviva. Treat with TSS if in humid, tropical or mould susceptible areas. Apply With
Brush, spray, applicator or roller.
No. of Coats Required
1 heavy coat or 2 wet-on-wet flood coats.
Recoat Time
Minimum 4 hours recoat
Drying/curing Time
Touch Dry: 1 hr
Walk On: 4 hours
Full Cure: 7 days
Coverage Rate m2/L
Rough Sawn Timber 2-5m² per litre
Sawn Timber 5-7m² per litre
Dressed Timber 7-10m² per litre
(square metres per litre)*
Sand Between Coats
No.
Clean Up With
Water.
Packaging Sizes
1, 4 and 10L.
Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project
Click here to visit the Intergrain webpage
